1. Remove the cover on the upper part of the tooth plate and remove the center shaft screw after removing it! 2. Use the 14-sleeve function of the crankset tool + 16MM open-end wrench to remove the shaft screw 3. Remove the center shaft screw and set it aside! 4, screw the black hood into the sprocket wheel, remember to screw it to the end, otherwise it is possible to pull the thread on the sprocket wheel in the top sprocket! 5. Screw the black hood to the end. 6. Screw the silver ejector into the hood and screw it in by hand. 7. Use the 16MM open-end wrench to make a mistake and screw the ejector rod in. It will be hard to screw it in here. It doesn't matter, force it in and screw it in. Just screw it in and you will be able to do it! 8. Screw the top rod to the end and the sprocket wheel is topped out!
Dimensions and Weight
Product weight: 0.1200 kg Package weight: 0.1400 kg