We are glad to introduce you to CinePro 4K, which can accomplish some tasks that traditional aerial photographic aircraft cannot do. It is lightweight, compact and capable of recording 4K at 30fps video with excellent quality and moving colors. CinePro 4K uses the improved GEP - CX2 frame and newly designed propeller guard. It has perfect aerodynamic performance, safety, durability and high efficiency. In terms of the power system, we use GR1105 5000KV motor, which is balanced, smooth and very suitable for aerial photographic quads. It is recommended that 4S battery be used to achieve the best efficiency. 4S 450mAh battery for indoor, 4S 650mAh battery for outdoor. The safe flight time is more than 4 minutes. CinePro 4K is carefully assembled and debugged by team. The BNF kit is bind & fly, the PNP kit needs your own receiver.
●HD Video Recording: 4K at 30fps, 2.7K at 60fps, 1080P at 90fps.
●Dual Camera System: 1200TVL FPV camera of competition-level, low latency within 10ms.
●WiFi / APP Support: video recording parameters are adjustable by WiFi / APP.
●Basic Version: F405 flight controller, STABLE V2 F405 30A.
●Black Box: 32Mb onboard flash memory.
●500mW VTX Power: effectively improves your flight distance.
●Aerial Photography Friendly: no sight of propellers and propeller protection frames in your video.
●Full Soft Mounted FC System: provides a clean operating environment for the gyro.
●Say Goodbye to Jelly: stable video, and comfortable FOV.
●Improved GEP-CX2 Frame: full 3K carbon fiber, 7075 aviation aluminum, high-precision CNC, rugged and durable frame, better protection for the 4K camera.
●New Propeller Guard: better airflow, higher flight efficiency.
●High Efficiency Motor: GEP - GR1105 5000KV motors, 4S battery ( 450 - 650mAh ) recommended.
●Taillight Design: eye-catching night view and lighting effects.
●Exquisite Assembly Process: eliminate any potential installation problems.
Frame: GEP - CX2 ( improved version, including guards )
STABLE V2 F405
Camera: Caddx Tarsier 4K 1200TVL
Motor: GEP - GR1105 5000KV ( 4S LiPo battery is best )
Propeller: EMAX AVAN 2 inch or DalProp Q2035 4-blade
VTX 5.8G 500mW
Weight: around 125g ( without battery )
STABLE V2 F4 Flight Controller:
Model: STABLE V2 F4 30A
IMU: MPU6000 gyro / accelerometer ( SPI )
OSD: BetaFlight OSD w/ AT7456E chip
BEC output: 5V at 3A
Integrated LC filter
Firmware target: OmnibusF4SD
Size: 26 x 26mm board, 20mm mounting holes ( (M2)
STABLE V2 F4 2 - 5S 4 in 1 ESC:
Input: 2 - 5S LiPo
Dimensions:31 x 31mm ( including the power pads )
Mounting holes: 20 x 20mm,M2
Supports Dshot600, Proshot, Oneshot, Multishot
Current meter: yes
Target: G - H - 30
STABLE F4 5.8g 500mW VTX:
Input voltage: 5V
Power transmission: 0mW ( Pit mode ) / 25mW / 100mW / 200mW / 400mW/ 500mW
Size: 24 x 26 mm
Mounting holes dimension: 20 x 20mm
Connector type: MMCX connector
BEC output: 5V/1A for camera of FC
IRC tramp protocol
Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
Small Parts Disclaimer:
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.