Product Name: car handle protection film
Product material: OPVC colorless and transparent
Commodity specifications: General
Anti scratch, anti fouling and anti-corrosion, to prevent radiation, enhance beautiful; strong toughness, anti scratch and wear resistance, experimental contrast, perfect care, bright and transparent, simple construction points:
1 transparent, do not change color, not yellow;
2 high viscosity, wear-resistant, easy to operate;
3 weather resistance -30 degrees Celsius, +80 degrees celsius;
4 on the surface of the body without any damage.
"Rhinoceros skin" mount the main parts: before and after the bumper, engine cover front, the leading edge of the rim, after the outer edge of the mirror, outside edge, open the door to the inner edge of the handle; the key hole, the trunk and side door pedal and other. Protect the car paint is slight collision and scratching the paint.
Instructions for use: (the product is followed by description and schematic diagram):
1, please handle concave wipe clean (for protection has been scratched, need more leaders, before using please sand wax of concave slightly processed, the effect will be better.
At the end of the paper, 2 off the product, use spray with water, evenly sprayed a little fog in the rubber surface and concave handle;
3, let the rubber surface close to the concave upper and lower sliding around the adjustment of right position;
Two, 4 of the middle surface of the thumb tight pressure, into a word to the two sides gradually advancing, squeezing out the water;
5, fingers pressed middle to upper level, gradually squeezed out of the water, in case of tilt and fold, heating with hot hair (low profile), and soothes you can;
6, fingers pressed down the middle level, gradually squeezed out of the water, in case of tilt and fold, heating with hot hair (low profile).