Open our Cool Free APP!
Enjoy APP-Exclusive Deals.
Laserhead need adjust Focus, and focus dot is the most powerful part.
How to Adjust Focus: Turn the focusing head in front of the laser head. The smallest and brightest spot is the focus. In usual recommended adjust the laserhead to low light state ( set by software / press low light button in the module, in low light mode module with red flash ), after adjust the focus turn back to strong light mode to do carvering wrok ( focus distance appr. 5-8 cm )
Material: Aluminum Alloy + Acrylic
Main Color: Black
Power Supply: AC 100-240V Output 12V 5A
Plug Type: EU
Laser specifications: BX2.3/BX3.5/BX5/ BX7/ BX15/ BX20(Optional)
Laser Wavelength: 405nm,445nm
Supported OS: Win 7 and above( not support XP and below system, not support Apple MacOS system)
Controller Board: VigoTec
Communication Port: Mini USB
Stepper Motor: 42 Stepper motor, Step Angle 1.8°.
Supported Software: Engraving machine software uses VigoEngraverL7, Support GRBL, benbox, elekscam, if you have firmware you can use.
Supported Formats: jpg / bmp / DXF / G-code
Print Size: Recommend Print Size 330x190mm
Engrave Mode: For Image and Text input, there are Line Scanning, Point Scanning, Grayscale, Black- White, and Contour carving. For dxf file, vector carving.
Laser Quick Replace: Support
Continuous Work Time: Sustainable Working (With Heat Dissipation Fan)
Working Voltage: DC 12V
Working Current: ≦DC 5A Normal operation depends on the laser power installed.
Engraving Accuracy: 0.05mm
Engraving Area: 330 * 190mm / 13.0 * 7.5in
Laser Focus Distance: about 5-8cm
Can Not Carve Objects: All metals, glass, stone, ceramics, jewelry, silver, reflective material, translucent & transparent material.
Can Carve Objects: All wood, bamboo, paper, plastics, leather, rubber, horn, sponge sheet, etc.
Can Cut Objects: Paper-thin, light wood, sponge paper, felt, fabric, sticker.
Item Size: 445*401*128mm / 17.52 * 15.79 * 5.04in
Package Size: 480*200*100mm / 18.90 * 7.78 * 3.94in
Package Weight: 2202g / 4.85lb
1 x Frame Part A(Lower part)
1 x Frame Part B(Upper part)
1 x Laser Head
2 x Stepper Motor Wire
1 x Laser Wire
1 x Side to Main Control Board Wire
1 x USB Cable
1 x Power Supply
1 x Protective Glass
1 x Hardware Installation Manual
4 x M5 Nut(For frame fixed)
2 x M3x12 Screw(For frame fixed)
2 x M3 Nut(For laser fixed)
2 x Wood Block
2 x Paper