Open our Cool Free APP!
Enjoy APP-Exclusive Deals.
The Xiaomi Wireless Repeater is designed to extend WiFi coverage and enhance signal strength by repeating the signal and reallocation of a home or office wireless router. With speeds of up to 300Mbps and built-in dual antennas, it eliminates the WiFi dead zone, allowing you to enjoy seamless HD streaming, ubiquitous online gaming. It works with any standard WiFi router.
●2 external antennas
Dual external high gain antenna with transfer rates up to 300Mbps.
●Works with most routers
Extend your WiFi and provide reliable coverage, compatible with most standard routers or gateways.
Easy to plug into any outlet for WiFi expansion, plug and play after the first setup.
It will be updated automatically without any cumbersome operations.
●Expand Wi-Fi coverage
Supports up to 64 devices to connect at the same time, staying connected from all corners.
● Transmission rate: 300Mbps
● Antenna: 2 external antennas
● WiFi network frequency: 2.4GHz
● Power: 100 - 240V
Why not find an amplifier in my device?
You have to choose mainland China, then find this device and then connect because the amplifier is in Chinese version
What do the different colors of the indicator light mean?
The blue light is always on: the amplifier is running normally and the WiFi pairing is successful.
The yellow light is always on: the amplifier starts up and the process is very short, about 10 seconds.
Blinking blue: Waiting for pairing, pairing or pairing failed. The WiFi password of the original network can be changed, or it can be far from the original network.
Continuous red light: The startup failed, please reconnect and try to repair. If the problem persists, please call the after-sales service department.
Why does the amplifier always flash orange and then the blue light flashes?
The initial setup was not successful. Pairing cannot be completed after inserting the Xiaomi USB router.
Please upgrade your router to the latest development or stable version (2.0 or higher)
Check that the amplifiers are paired. If paired, reset the amplifier to factory settings (fix the reset hole with the stylus for 5 seconds) and then re-pair
Paired amplifiers are shown in blue flashing
Try to connect or disconnect the amplifier, or reset the amplifier (use the PIN pin to fix the reset hole for 5 minutes) and then reapply
How to customize the network name and password of the amplifier?
Not yet supported,
How to upgrade the firmware?
When the amplifier is idle, it is found that the scalable version will automatically complete the upgrade;
In addition, you can manually upgrade to the latest firmware via the Xiaomi Routing Client or the Xiaomi Smart Home Client.
Why can't the amplifier receive signals from the router?
A close-range router is required so that the amplifier can obtain a stable signal, at least two squares or more.
Original millet Pro 300M WiFi router amplifier repeater signal cover extender Roteador 2 router repeater repeat intermediate repeater