Type LED parking sensor
Power supply voltage 12V
Power 2 ( W )
Probe 4 ( pieces )
Detection range 30 - 200
Reminder type buzzer
Working temperature 20 ( Deg.C )
Baby details: Parking sensor
The reversing system consists of: probe, microcomputer digital control box, display three parts. Collision accidents are prevented by an ultrasonic probe mounted at the rear of the vehicle, a four-level alarm or a voice alarm between the rear of the vehicle and the obstacle.
First, functional characteristics:
1. Front anti-friction angle, rear anti-collision, unique design and convenient operation.
2. Bi-Bi sound prompt plus digital distance display, the night is obvious advantage.
3. Color seven-segment display, from far to near, distinguish between left and right.
4. Sound, digital display integrated design, beautiful and harmonious.
5. The color of the outside of the sensor is mixed with the car body, just like the original car configuration.
6. Humanized design, live voice reporting (voice type).
Second, technical parameters:
1. working voltage: DC12V ± 2V
2. Detection range: before: 0.3 - 0.8m After: 0.3 - 2.5m
3. Working temperature: -30 Deg.C - +80 Deg.C
4. Working current: 200mA ± 50mA
5. Ultrasonic frequency: 40KHz
Third, the alarm parameters:
1 Distance more than 2.5: safe zone, distance display: none, warning tone: no sound, color: none;
2 Distance 2.5 - 1.6M: safety zone, distance display: 2.5 - 1.6, warning tone: silent, color: green;
3 Distance 1.5 - 1.0M: safety zone, distance display: 1.5 - 1.0, warning tone: Bi...Bi...Bi... or voice report distance, color: green;
4 Distance 0.9 - 0.5M: warning zone, distance display: 0.9 - 0.5, warning tone: Bi...Bi...Bi... or voice report distance, color: yellow;
5 Distance 0.0 - 0.4M: danger zone, distance display: 0.0 - 0.4, warning tone: Bi...Bi...Bi... or parking, color: red;
Fourth, use precautions
1. The surface of the sensor should be kept clean from time to time. If the mud cover will affect the detection sensitivity or the whole system will not work properly.
2. Obstacles are smooth slopes, round balls or sound-absorbing cotton, which may affect the detection efficiency of the system.
3. After the installation is completed, please make verification of different obstacles from different angles under the command of someone, and it is more convenient to use.
4. The parking positioning system is only used for auxiliary purposes and cannot relieve the driver of the responsibility of controlling the vehicle in critical situations.
5. Under certain conditions, the distance between the car and the obstacle is too close (within 0.2 meters), and the system may not be able to detect it smoothly.
Baby standard list:
1 x display, 1 x control box, 4 x probe, 1 x power cord, 2 x sticker, 1 x English and Chinese installation instructions, 1 x open hole drill
The length of the reversing radar:
4 probe: the last 4 probes are 2.5 meters, the display is 5.5 meters
Power cable interface: red to "ACC", yellow to "R", blue to "+", black ground.