The 4000W regulator is again technically upgraded, and the regulation range can really be smoothly adjustable from 10V-220V, more suitable for industrial enterprises that require low-voltage driven happiness wire: such as cutting foam, pearl cotton, raincoat production, etc.
Product Name: 4000W AC regulator
Variable Silicon Model: BTA41600B
Size: length 85 * width 55 * height 38mm, knob, 6mm in the hole.
It is high-power: 4000W (resistive load limit power), long-term power should be reduced.
Efficiency: 90% or more
Working voltage: exchange 220V
Adjusting voltage: Communication 10-220V
Note that the load will be adjusted first.
Controllable silicon is mainly used in resistive load (electric wire incandescent lamp, etc.), and most of the single-phase AC motor can, but it is not guaranteed, other types of loads, please confirm the buyer. The fuse is not universal, there is a reaction time, if the current is too large, in addition to burning the fuse, the module may also burn down.
Note that the plastic cover on the joint cannot be completely opened due to the installation of the shell, the screwdriver should be twisted, and be careful when it is opened, and it is too easy to break the cover. Express transportation may also be crushed, which is the losage, but Will not affect the use of modules, all of the plastic lid related issues This store is not responsible for returning.
Regulator size: length 85mm * width 55mm * height 35mm
The outer shell with fused pressure press is safer, it is more convenient to install, more suitable for home and inconvenient installation factories.
Use the original inlet 41A thyristor.
Use 1.6 thick FR-4 high-temperature circuit board, circuit design reasonable, and adopt a thickened welding circuit design, even if the large current is also sufficient, it is more secure and more reliable.
With the material, the 4-bit terminal of the standard 35A is used, so that the design is really 4000W. (Two into two more convenient wiring).
The circuit has passed many technological improvements, and each accessory is selected, and it has been fully technically mature. The use of dual capacitance design (safety capacitance + metal film capacitance) effectively absorbs the surge and voltage tip, more effective protective silicon, and more efficient and more efficient.
External 1.5 thick aluminum plate and stainless steel mold stamping, beautiful and generous, more suitable for home temperature regulation speed and industrial enterprises! Beautiful, safe, convenient, high-quality products, absolutely from time to time, the bare plate regulator can be better than. The use time will not rust and other appearance problems.