● Exquisite materials: carbon fiber heating wire is used as a heating material. The carbon fiber heating wire is not easy to break, is soft and can be bent at will, so the heating gloves can be rubbed and washed.
● Equipped with 6pcs rechargeable AA batteries, the input voltage is only 3.6-4.5V (equivalent to 4 batteries), the input voltage is small, and the Chinese intellectual property patent certificate has been obtained. Copyright certificate, CE certification certificate.
● Energy saving and power saving: The heating temperature can reach 42-50 degrees Celsius which is comfortable for the human body after power on, and its power is less than 5W (on average, it consumes 1 kWh of electricity in 200 hours).
● Easy to use: heating gloves design the discharge IC circuit by themselves to control the discharge function. The battery is uniquely designed to be placed invisible and hidden inside the glove for convenient travel. (1 set of products requires 6pcs AA batteries, customers are equipped with AA batteries, it is recommended to buy rechargeable AA batteries, recharge and use, the larger the capacity, the longer the heating time).
● Long heating time: 6pcs rechargeable AA batteries are installed, and the energy-saving mode can be used continuously for 6-8 hours, which will keep your hands warm in the cold winter!
● First install qualified new batteries into the battery box. Each battery box contains 3 batteries. Install according to the positive and negative directions on the battery box. After the installation is OK, cover the battery box.
Connect the DC plug of the electric heating product to the DC buckle of the battery box, and pull the power switch on the battery box to ON. At this time, the power work indicator light is on and red.
● Press the switch often for 3 seconds, the red light is faintly bright, indicating that the switch is in breathing preheat protection, press the default red high temperature gear (continuous heating), the product will slowly heat up within 1 minute, until it reaches 55-60 After the degree of Celsius, the temperature is automatically maintained.
Manually press the switch to turn the green light to the middle temperature range. The green light is always on (at this time the temperature is about 45-55 degrees. Press the switch again, the blue light is always on, and it enters the low temperature range. The temperature is about 40 degrees. Press the switch again to turn to a constant red light, enter the high temperature range, and cycle.
Press and hold the switch for 3 seconds to shut down, but shut down all LED lights off.